APS Designated Electrical Equipment Inspectors

Inspector	Division	Phone	Email	Focus Area
Steve Bogdan	AES-EFOG	2-0800	[email protected]	438 FC/Entire Ring if Needed
Bruno Fieramosca	AES-EFOG	2-0201	[email protected]	432 FC/Entire Ring if Needed
Clay White	AES-EFOG	2-0300	[email protected]	433 FC/Entire Ring if Needed
Tim Smith	AES-EFOG		[email protected]	Entire Ring if Needed
Steve Corcoran	XSD	2-0671	[email protected]	Sector 23
Alex Deriy	XSD	2-7681	[email protected]	2-BM, 32-ID
Alex Lavens	XSD	2-0642	[email protected]	Sector 19
Mike Pape	XSD	2-0591	[email protected]	9-BM, 20-BM, 20-ID, 18-ID
Alexis Quental	XSD	2-2509	[email protected]	9-ID-C, 12-BM-B, 12-ID-B,C
Rogelio Ranay	XSD	2-6031	[email protected]
Eric Rod	XSD	2-0412	[email protected]	Sector 16
Rick Spence	XSD	2-2797	[email protected]	Sector 11, 17-BM
Ray Ziegler	XSD	2-5527	[email protected]	7-BM, 7-ID, 8-ID
Pasquale Di Donna	PSC-USR	2-0428	[email protected]	Sectors 13, 14, and 15
Michael Roberts	XSD		[email protected]
Ray Davis	AES	2-5072	[email protected]
Phil McNamara	AES	2-9836	[email protected]
Adam Brill	ASD	2-9968	[email protected]
Chuck Doose	ASD	2-6037	[email protected]
Bill Guszczo	ASD	2-9695	[email protected]
Leo Martinez	ASD		[email protected]

To contact the APS DEEIs please use [email protected]

All APS User electronic and electrical equipment must be inspected before use in an experiment. Please ask your beamline to make arrangements with one of the inspectors listed above.

Reviewed: June 13, 2024

06.21.2024